智能制造網>產品庫>儀器儀表>其它儀器儀表>其它>>HP101U Conventional Fire Alarm Cont...

HP101U Conventional Fire Alarm Control Panel 4/8/16區 ETL

參考價	面議

參考價

面議

具體成交價以合同協議為準

公司名稱深圳市眾安科電子有限公司
品牌
型號
所在地深圳市
廠商性質其他
更新時間2026/7/10 9:20:41
訪問次數21

產品標簽:

在線詢價收藏產品點擊查看電話

聯系我們時請說明是智能制造網上看到的信息，謝謝!

索取相關資料

公司介紹主營產品

深圳市眾安科電子有限公司生產銷售經銷多種獨立聯網煙感探測器、可燃氣探測器、火災報警系統、安防報警系統產品等，在消費者當中享有較高的地位。公司與多家零售商和代理商建立了長期穩定的合作關系?！∩钲谑斜姲部齐娮佑邢薰窘涗N國內外多家消防火災報警產品——海灣，松江云安，北大青鳥，利達，三江，霍尼韋爾，西門子等全部通過國家消防*，品種齊全、價格合理?！∩钲谑斜姲部齐娮佑邢薰荆匦庞谩⑹睾贤⒈ＷC產品質量，以多品種經營特色和薄利多銷的原則，贏得了廣大客戶的信任。公司以：誠信、專業、快速、優質為企業服務理念。公司以*的產品性能、價格比，與廣大工程商、經銷商建立了良好的合作伙伴關系。英文版可尋址火災報警系統和通過EN54認證，ETL認證及CE認證的多線火災報警系列產品，遠銷歐洲、美洲、非洲、澳洲及中東地區，深受廣大客戶好評。

展開顯示更多內容

產品簡介在線詢價

CHAPTER1:ProductDescriptionThePANELisa4-zoneto16-zoneFACP(FireAlarmControlPanel),whichusesconventionalinputdevices

HP101U Conventional Fire Alarm Control Panel 4/8/16區 ETL 產品信息

CHAPTER 1: Product Description
The PANEL is a 4-zone to 16-zone FACP (Fire Alarm Control Panel), which uses conventional input devices.
The panel accepts water flow devices, two-wire smoke detectors, four-wire smoke detectors, pull stations and
other normally-open contact devices. Outputs include four Notification Appliance Circuits (NAC, SOUND1-4),
three standard Form-A relays (alarm, trouble and supervisory) and an EIA-485 port to interface with remote
annunciators and optional remote relay modules. The FACP is field programmable via the panel keypad. It also
supervises all wiring, AC voltage and battery level.
This series of panels are basically the same in application and operation, their differences are shown in Table 1-1.
PANEL will be described as the example in the following sections.
Table 1-1
FACP Number of Detection Zones Number of Sounder Outputs Output Delay Settings
8113-4 4 1 N/A
8113-8 8 2 N/A
8113-16 16 4 N/A
1.1 Product Features
l 4,8,16 Class B Initiating Device Circuits (IDCs)
? All zones accept conventional detectors and any normally open contact device
l Four Class B Notification Appliance Circuits (NACs)
l One Form-A Alarm Relay
l One Form-A Trouble Relay
l One Form-A Supervisory Relay
l 3.0 amps of system power
l Max 30 conventional detectors in one zone.
l Auto/Manual mode setting enable walk test.
l Each Zone can be disabled,
l Sound output can be disabled.
l Manual active sound output enabled.
l Able to report short and broken circuit of detection zones.
l Designed with standby batteries and space provision for two sealed lead-acid batteries.
l Testing and disable functions.
l Can connect max 32 repeater panels by RS485 communication port
l Dimensions : 14.57" (37 cm) long X 17.32" (44 cm) high X 3.94"(10cm).
l Weight: 6.6kg (without battery).

1.2 Specifications
AC Power
90-270 VAC, 50 Hz, 2.3 amps
Wire size: minimum #14 AWG (2.0 mm2) with 600V insulation
Battery (lead acid only)
Maximum Charging Circuit: Normal Flat Charge—27.6V @ 0.8 amp
Maximum Charger Capacity: 18 Amp Hour batter
Sound Output Device Circuits
General Alarm Zones 1 through 16
Operation: All zones Class B
Normal Operating Voltage: Nominal 24 VDC (ripple = 100 mV maximum)
Alarm Current: 15 mA threshold
Short Circuit Current: 42 mA maximum
Maximum Loop Resistance: 100 ohms
End-of-Line Resistor: 4.7K, ½ watt
Detector Loop Current is sufficient to ensure operation of two alarmed detectors per zone
Standby Current: 7.26 mA
Three Relays Output
Relay contact rating: 2.0 amps @ 30 VDC (resistive), 2.0 amps @ 30 VAC (resistive)
Nonresettable 24 VDC Power
Maximum ripple voltage: 10 mVRMS Operating Voltage nominal 24 volts
Total DC current available from this output is up to 500 mA
Recommended maximum Standby current is 150 mA